|
|
Mighty Mini SST
- Smallest and lightest Abanaki skimmer - weighs about six pounds
- Easily hand carried to the source of the problem - can fit almost anywhere
- Oil removal rates up to 2.0 gph
- Designed for tank depths from 6" to 24" (15.2 cm to 61.0 cm)
- Belt and tail pulley can fit through a 2" (5.1 cm) diameter bung hole
- Great for automotive and mobile equipment service shops
- Very affordable
- Ask about OEM options
- Stainless steel construction
- Integrated 24 hour timer
|
|
|
The Portable Tote-It
- Lightweight for portability; approximately 36 pounds
- Can be installed permanently in limited access areas
- Oil removal rates up to 12 gph (45 lph)
- Standard length is 5' center to center (10' maximum)
- For medium duty applications; parts washers, tanks, etc.
|
|
|
Oil Grabber Model 4
- A single unit elevates and separates oil at a rate up to 20 gph
- Lifts oil up to 100' without the need of expensive pumps
- Maintains skimming efficiency with fluctuating fluid level
- Can be used in depths as shallow as one foot
- Requires no tank modifications in most applications
- Operates in turbulent liquid using optional tail pulley cage and tether assembly
- Easy mounting and fast cleaning, with minimal maintenance
|
|
|
Oil Grabber Model 8
- Similar to the Model 4 with additional features
- A single unit elevates and separates oil at a rate up to 40 gph
- Can be used with a full range of Abanaki options (heater, debris rakes,
belt and tail pulley tethers, etc.)
- Saves coolant and conserves wash water
- Flagship unit of Abanaki's product line
|
|
|
Oil Grabber Model MB
- Designed for jobs that require high capacity oil removal
- Each belt increases the removal rate by up to 40 gph
- 2 x 8 skims 80 gph
- 3 x 8 skims 120 gph
- 5 x 8 skims 200 gph
- Utilizes continuous belts and wipers to remove oil from the fluid surface.
|
|
|
Oil Boss
- Skims up to 16 gph
- Completely constructed of Stainless Steel
- Drive unit is completely covered
- Comes with a pilot light and on/off selector
- Easily decontaminated
|
|
|
Grease Grabber
- Abanaki's most rugged unit
- Works for both greases and oils
- Grease removal rates up to 160 gph (606 lph)
- Designed for extremely demanding environments
- Suitable for outdoor drainage pits in primary metal mills
- Optional boom mast mount with swing arm for large pits and tanks
- Integral 700W heater keeps skimmed grease fluid for easy discharge
|
|
|
PetroXtractor - Well Oil Skimmer
- Used primarily for groundwater remediation through monitoring and remediation wells
- Comes in three varieties
- PX-A for 2" diameter wells (3gph, SAE 30)
- PX-B for 4" diameter wells (6gph, SAE 30)
- PX-C for 6" diameter wells (12 gph, SAE 30)
- Works for LNAPL's and some DNAPL's (coal tar, #6 fuel, etc.)
- Options include: explosion proof setup, below grade mounting kits, timer, housing
55 gallon drum shutoff switch and air motors
|
|
|
Oil Concentrator
- Removes residual water in the skimmed oil
- Provides virtually complete oil/water separation
- An optional unit available on all Abanaki oil skimmers
- Uses no electricity, timers, sensors, pumps, or other moving parts
- Several sizes to fit any application
- Optional heater available for high viscosity oils and low temperatures
- Removable sludge screen and drain plug facilitate routine maintenance
- All hardware provided for easy mounting to Abanaki skimmer
|
|
|
Q-VAC™ 100
- Empties coolant from sump
- Vacuums oil, coolant, and other floor spills
- Removes surface decontaminates from process baths
- Empties tanks and drain pits
- Vacuums containers and vats absolutely dry
- Minimizes use of absorption materials
- Fits on a standard 55 gallon, closed top drum
- Requires no filters
- Contains no parts to break or replace
|
|
|
Coolant Maintenance Products
- Mighty Disk™ Oil Skimmer
- Mighty Mini® SST Oil Skimmer
- TubeTastic!™ Oil Skimmer
- Coolescer™ Coolant Refresher
- Coolant™ Mints
- Abanaki Aerators
|
