General
|
|
|
|
|
Kason Products
|
|
|
|
|
|
|
|
|
|
K-Tron Products
|
|
|
|
|
|
|
Sturtevant Products
|
|
|
|
|
|
|
|
|
|
Western States
|
|
|
|
|
|
|
|
|
Abanaki Products
|
|
|
|
|
Comi-Condor Horizontal Peeler Centrifuge from Western States
|
Comi-Condor has the most advanced Horizontal Peeler Centrifuge available today.
Applications
- Pharmaceuticals and Fine Chemicals.
Design Features
-
Batch Capacities from 0.8 ft3 laboratory size to 32.5 ft3 production scale.
-
High Filtering Capability with 800 to 2,000 gravities of force.
-
Horizontal design assures even coating of the filter and avoids vibration problems due to loading.
-
Polypropylene PTFE cloth.
-
Gas tight to 400mm H2O (0.6 psig)
-
Automatic Front Housing (cover) Locking Ring.
-
All degrees of mechanical and electro-polish available.
-
Efficient cake removal and minimal residual cake (heel) with non-fouling blade, air knife and reverse blow-back from rear of filter.
-
Solids discharge chute is a steep 30° (37° on largest units) and assures no product hang up.
-
Integral Inertia Mass Pad and Hydro Viscous Dampers allow installation directly onto the floor.
-
Through-the-wall installation provides separation of clean room and mechanical service areas.
-
Shafts and bearings serviceable from rear (service area) side without contaminating the process side.
-
All process surfaces can be visually inspected.
-
Fully accessible gaskets and seals.
-
Cleaning-In-Place (CIP) Design.
-
Available in 316L stainless steel, Hastelloy, Monel, Alloy 59 and other exotic materials.
-
Coatings include Halar (ECTFE) , PTFE and Ebonite.
|
|