BSP-100
The BSP-100 features a single feeding duct formed by two rotating discs.
It includes a conical inlet transition piece which can be combined with a variety of standard extension hoppers.
A slide gate on the inlet allows for material shut-off and removal of feeder for cleaning and hopper emptying.
A low power stepper motor drive mechanism and controller provide excellent turndown and flexibility ensuring a very wide operating range.
The BSP-100 is designed for feed rates of 2 to 200 dm³/hr (0.07 to 7 ft³/hr).
It is available as a volumetric unit or as a gravimetric unit with a choice of 2 platform scales, single point suspension scale or three-point suspension scale.
BSP-125
The BSP-125 is a slightly larger version of the BSP-100, with all the same features except that it has two feeding ducts instead of one.
The BSP-125 is designed for feed rates of 9 to 900 dm³/hr (0.32 to 32 ft³/hr).
It is available as a volumetric unit or as a gravimetric unit with a choice of platform scale, single point suspension scale or three-point suspension scale.
BSP-150
BSP-150 is designed with four feeding ducts. With only one moving part and no pockets or screws, the design provides ease of use and almost zero maintenance.
The BSP-150 is designed for feed rates of 45 to 4,500 dm³/hr (1.6 to 160 ft³/hr).
It is available as a volumetric unit, or as a gravimetric unit with a choice of single point suspension scale or three-point suspension scale.
Benefits of the Revolutionary BSP Technology
- True Positive Displacement Action
- Linear Over Full Operating Range
- Uniformity of Discharge
- Active Discharge (minimal residual material)
- Unaffected by Differential Pressures
- Mechanical & Maintenance Simplicity
|