Application
The K2G single feeder unit is a lower cost alternative for feeding free flowing pellets when no agitation is required. In a multi-feeder unit, it offers a high accuracy multi-stream loss-in-weight feeding system for precise ratio control. The compact K2G system is designed to fit directly over the throat of an extruder.
Volumetric Single Screw Model
Materials Fed: free-flowing pellets.
Model
|
Low feed rate
|
High feed rate
|
|
dm3/hr
|
ft3/hr
|
dm3/hr
|
ft3/hr
|
K2G-V
|
0.4
|
0.014
|
3125
|
110
|
Control Options
Digi-Drive
Loss-in-Weight Single Screw Model
Materials Fed: free-flowing pellets.
Model
|
Low feed rate
|
High feed rate
|
|
dm3/hr
|
ft3/hr
|
dm3/hr
|
ft3/hr
|
K2G-L
|
0.5
|
0.02
|
2813
|
98.5
|
Control Options
SLM Smart Lopo Module. KSU single feeder control.
K2G Smartflow™ Feeding System (Weighblender) The K2G Blender is a continuous gravimetric blender
Materials Fed: free-flowing pellets (optional powder feeders available).
Model
|
Low feed rate
|
High feed rate (per module)
|
|
dm3/hr
|
ft3/hr
|
dm3/hr
|
ft3/hr
|
K2G-Multi
|
0.5
|
0.02
|
2813
|
98.5
|
K2G Twin Screw Loss-in-Weight Feeder Module
Materials Fed:
pigments, sticky, lumpy or bridging powders.
Model
|
Low feed rate
|
High feed rate
|
|
dm3/hr
|
ft3/hr
|
dm3/hr
|
ft3/hr
|
K2G-T20
|
0.1
|
0.004
|
200
|
7.0
|
Control Options
K2G feeders may be configured with the SCM (Smart Control Module) or the SLM Smart Lopo Module. Operator interface options include:
KSU single feeder control.
KSL single line control (up to 8 feeders).
KSC multi-line control (up to 30 feeders and up to 8 lines).
Other Options
Hazardous Areas: K-Tron provides equipment that can meet area classifications according to American or European standards.
|